MSI Big Bang -Trinergy

MSI Big Bang - Trinergy

What we really wanted to show you at this point was MSI's BIG Bang Fuzion, the eagerly anticipated motherboard based on Lucid's Hydra technology. Fuzion is not quite ready yet unfortuantely. In the meantime, we've been sent another board to review from MSI's Big Bang series called the P55 Trinergy. Not quite as exciting on paper, the Trinergy is basically the MSI P55 GD-80 on steroids. The testosterone in this case is supplied by a slew of tantalum capacitors and overclocking gadgetry topped off with NVIDIA's NF200 multiplexing features to provide additional PCI-E lanes for multi GPU setups.

MSI's angle for these additions is that they want to be seen as a high-end vendor, so they are ramping board features in a bid to be seen as a bona-fide entity that can deliver class leading products. One can't begrudge the aspiration, although high-end typically means high price too. In keeping with that tradition, the Trinergy has an MSRP of $349. Yes, that's right, $349 for a P55 board! That's the kind of money that will buy you a bells and whistles X58 motherboard that can do CrossFire X or Triple SLI natively. Not to mention that X58 boards in this price range tout similar overclocking centric features. We don't think much more needs to be said really.

Considering the Trinergy's intended audience, the primary focus of this review will be gaming performance in multi card configurations against other P55 boards, and of course the elephant in the room called X58. We're going to stick with the article format we first introduced in the MSI-GD 65 review. You get everything you need in terms of quirks and merits right here on the front page together with the final conclusion.

Overview/Conclusion

Those of you that read our MSI GD-65 review will recall a couple of things that Gary highlighted as needing improvement. First of all, sleep mode recovery at higher BCLKs not working on the GD-65 (190 BCLK and over). We're happy to say the Trinergy does not share this trait. S3 sleep mode recovered all the way to 215 BCLK (manual overclocking) for us on this board, which is as high as anyone will likely need it to work.

One of the more serious issues on the GD-65 was also the inability for OC Genie to work properly with some of our lab PSUs. It seems things have improved on this front too; repeated tests on the Trinergy have not shown any issues with our PSUs thus far. While we're on the subject of OC Genie, MSI's voltage defaults for automated overclocking routines came in very close to what we actually needed while using manual settings. Automated overclocking took our CPUs to 197 BCLK x 19 (3743MHz effective) with minimal fuss. This makes things quick and easy for those of you who don't like fiddling around with the finer sides of the BIOS; you just push one button and the board does the rest.

Our major concerns during the test period centered on MSI's bundled overclocking software misapplying and misreporting voltages. This is a situation that has plagued all of MSI's P55 boards to date. We finally received a fix early this week and are happy to report that the problem (on the Trinergy at least) has been isolated and "fixed".

Memory overclocking was another area needing attention; again we roll back to the GD-65 exhibiting similar issues. The problems mostly involved memory sub-timings failing to respond to manual changes and misreporting the actual value. MSI tells us they have managed to identify the problem and should have a BIOS fix for it shortly.